RESEARCH SUBJECTS

Ÿ   Anchorage and splice of high-performance reinforcement

Ÿ   Innovative old-new concrete joints for building remodeling

Ÿ   Structural evaluation of existing structures

 EDUCATION

Ÿ   B.S. in Architectural Engineering, Seoul National University, Feb. 1994

Ÿ   M.S. in Architectural Engineering, Seoul National University, Feb. 1996

Ÿ   Ph.D. in Architectural Engineering, Seoul National University, Feb. 2007

PROFESSIONAL CERTIFICATION

Registered Professional Engineer (Structure) in Korea

PROFESSIONAL SOCIETY MEMBERSHIP

Ÿ   Korea Concrete Institute, Board Member

Ÿ   Architectural Institute of Korea, Member

Ÿ   Korean Structural Engineers Association, Member

Ÿ   Korea Institute for Structural Maintenance and Inspection, Vice-President

Ÿ   Korean Society of Steel Construction, Member

Ÿ   American Concrete Institute, Member

EXPERIENCE

Ÿ   August 2014 –Present

            Incheon National University in Korea

            Professor in Division of Architectural & Urban Design

Ÿ   September 2010 – August 2014

         Mokpo National University in Korea

            Assistant Professor in Department of Architectural Engineering

Ÿ   March 1996 - August 2010

      Daewoo Engineering & Construction Co. Ltd.

            Principal Researcher in Architectural Engineering Research Team

DISSERTATION

Ÿ Strut-and-Tie Model for Anchorage of Headed Bars with Bond Resistance:

Ph.D. Dissertation, February 2007

Ÿ A Study on the Integrity of Precast Concrete Panel Structures by Cantilever Walls Model:

Master’s Thesis, February 1996

PUBLICATION (Selected)

Ÿ  “Side-Face Blowout Strength of Large-Diameter High-Strength Headed Bars in a Single Layer or Two Layers Terminated within Exterior Beam.Column Joints,” Journal of Structural Engineering, ASCE, Hye-Jung Sim, Sung-Chul Chun, and In-Ho Kim, Vol. 149, No. 2, Feb. 2023, DOI 10.1061/JSENDH.STENG-11450

Ÿ  "Group Behavior and Concrete Breakout Strength of 16 mm Deformed Wire Anchors in Tension," ACI Structural Journal, Mun-Gil Kim and Sung-Chul Chun, Vol. 119, No. 5, Sep.-Oct, 2022, pp. 299-310 ISSN: 0889-3241, 10.14359/51734669

Ÿ  "Side-Face Blowout Failure of Headed Bars in High-Strength Concrete," ACI Structural Journal, Hye-Jung Sim and Sung-Chul Chun, Vol. 119, No. 5, Sep.-Oct, 2022, pp. 3-16 ISSN: 0889-3241, 10.14359/51734834

Ÿ  "Side-Face Blowout Strength of Two-Layer Headed Bars Embedded in Exterior Beam-Column Joints," ACI Structural Journal, Hye-Jung Sim and Sung-Chul Chun, Vol. 119, No. 2, Mar-Apr, 2022, pp. 221-231 ISSN: 0889-3241, 10.14359/51734338

Ÿ  "Cyclic Loading Tests of Slab-Wall Connections Using Removable Rail Mechanical Splices," ACI Structural Journal, Sung-Chul Chun Jang-Woon Baek, Thomas H.-K. Kang, and Mun Gil Kim, Vol. 117, No. 3, May-June, 2020, pp. 155-167 ISSN: 0889-3241, 10.14359/51723505

Ÿ  "Components of Side-Face Blowout Strengths of Headed Bars in Exterior Beam-Column Joints," ACI Structural Journal, Sung-Chul Chun and Byung-Soo Lee, Vol. 116, No. 2, Mar.-Apr., 2019, pp. 159-169 ISSN: 0889-3241, 10.14359/51711141

Ÿ  "Headed bars in simulated exterior beam.column joints of UHPFRC," Magazine of Concrete Research, Hye-Jung Sim, Sungchul Chun (corresponding), Sokhwan Choi, Eunjong Yu, Vol. 70, No. 19, Oct., 2018, pp. 1016-1026, http://dx.doi.org/10.1680/jmacr.17.00355, Online published 30, Oct. ISSN: 0024-9831

Ÿ  "Headed bars in simulated exterior beam-column joints of UHPFRC," Magazine of Concrete Research, Vol. 69, http://dx.doi.org/10.1680/jmacr.17.00355, Online published 30, Oct. 2017, ISSN: 0024-9831

Ÿ  "Side-Face Blowout Strength of 43 and 57 mm (No. 14 and No. 18) Hooked Bars in Beam-Column Joints," ACI Structural Journal, Vol. 114, No. 5, Sep.-Oct., 2017, pp. 1227-1238 ISSN: 0889-3241

Ÿ  "Components of compression splice resistances in high-strength concrete," Magazine of Concrete Research, Vol. 69, No. 10, May, 2017, pp. 502-511, http://dx.doi.org/10.1680/jmacr.16.00412, Online published 14, Mar. ISSN: 0024-9831

Ÿ  "Side-Face Blowout Failure of Large-Diameter High-Strength Headed Bars in Beam-Column Joints," ACI Structural Journal, Vol. 114, No. 1, Jan.-Feb., 2017, pp. 161-172 ISSN: 0889-3241

Ÿ  “Cyclic Testing of Reinforced Concrete Columns with Double or One-Side Headed Shear Reinforcement,“ Journal of Vibroengineering, Vol. 18, No. 7, 2016. pp. 4563-4573 ISSN: 1392-8716

Ÿ  “Safety and Serviceability of Reinforced Concrete Beam-Column Joints Supported by Shores and Reshores during Construction,” Journal of Structural Engineering, ASCE, Vol. 142, No. 7, DOI 10.1061/(ASCE)ST.1943-541X.0001494, 2016

Ÿ  “Lap Splice Tests Using High-Strength Headed Bars of 550 MPa (80 ksi) Yield Strength,” ACI Structural Journal, Vol. 112, No. 6, Nov.-Dec., 2015, pp. 679-688 ISSN: 0889-3241

Ÿ  “Behavior and Strengths of Single Cast-in Anchors in Ultra-High-Performance Fiber-Reinforced Concrete (UHPFRC) Subjected to a Monotonic Tension or Shear,” KSCE Journal of Civil Engineering, Korean Society of Civil Engineers, , Vol. 19, No. 4, May, 2015, pp. 964-973, DOI 10.1007/s12205-013-0246-8, ISSN: 1226-7988

Ÿ  “Effects of joint aspect ratio on required transverse reinforcement of exterior joints subjected to cyclic loading,” Earthquakes and Structures, Techno Press, Vol. 7, No. 5, Nov. 2014, pp. 705～718

Ÿ  “Cyclic Behavior of Wall-Slab Joints with Lap Splices of Cold-Straightened Rebars and Mechanical Splices,” Journal of Structural Engineering, ASCE, (Online published on 26th June, 2014) DOI 10.1061/(ASCE)ST.1943-541X.000164

Ÿ  “Bond strength of glass fibre-reinforced polymer bars in unconfined concrete," Engineering Structures, Vol. 34, No. 1, Jan. 2012, pp. 303-313, ISSN: 0141-0296

Ÿ  “Compression Splices in High-Strength Concrete of 100 MPa (14,500 psi) and Less," ACI Structural Journal, Vol. 108, No. 6, Nov.-Dec., 2011, pp. 715-724, ISSN: 0889-3241

Ÿ  “Compression Splices in Confined Concrete of 40 and 60 MPa (5800 and 8700 psi) Compressive Strengths," ACI Structural Journal, Vol. 107, No. 4, July-August, 2010, pp. 476-485, ISSN: 0889-3241

Ÿ  “Compression Lap Splice in Unconfined Concrete of 40 and 60 MPa (5800 and 8700 psi) Compressive Strengths," ACI Structural Journal, Vol. 107, No. 2, March-April, 2010, pp. 170-178, ISSN: 0889-3241

Ÿ  “Anchorage Strength and Behavior of Headed Bars in Exterior Beam-Column Joints," ACI Structural Journal, Vol. 106, No. 5, Sep.-Oct., 2009, pp. 579-590, ISSN: 0889-3241

Ÿ  “Flexural Test of a Composite Beam Using Asymmetric Steel Section with Web Openings," Journal of Structural Engineering, ASCE, Vol. 135, No. 4, April 2009, pp. 448-458, ISSN: 0733-9445

Ÿ  “Strut-and-Tie Model for Headed Bar Development in C-C-T Nodes," ACI Structural Journal, Vol. 106, No. 2, March-April, 2009, pp. 123-131, ISSN: 0889-3241

Ÿ  “Strut-and-Tie Model for Development of Headed Bars in Exterior Beam-Column Joint," ACI Structural Journal, Vol. 104, No. 5 Sep.-Oct. 2007, pp. 590-600, ISSN: 0889-3241

Ÿ  “Mechanical Anchorage in Exterior Beam-Column Joints Subjected to Cyclic Loading," ACI Structural Journal, Vol. 104, No. 1 Jan.-Feb. 2007, pp. 102-112, ISSN: 0889-3241

Ÿ  “Assessment of composite column and RC beam joints," Proceedings of the Institution of Civil Engineers, Structures and Buildings, Vol. 158, Issue SB3, June 2005, pp.201～215, ISSN 0965-0911